IC Programmers
Oscilloscopes, logic analyzers
Rotor balancing
Rotor balancing
image carousel

Oscilloscopes, logic analyzers


ScopeLogicDAQ 2.0 is a comprehensive measurement system used for data acquisition. The device includes a two-channel digital oscilloscope and a logic analyser that communicates with a PC via USB 2.0 interface. Maximum sampling rate for digital signal reaches 400MHz; in case of analog signals, this value is 200 MHz per channel. ScopeLogicDAQ 2.0 is also equipped with a Pattern Generator module which allows defining and generating any sequence of digital signals and t...


ScopeDAQ is a two-channel high speed digital oscilloscope with maximum sampling frequency of 200 MHz per channel. The user can take advantage of observing 2 analog channels simultaneously using standard oscilloscope probes. The device is equipped with big internal ram memory buffer to allow the user real time registation of long sequence of signals.ScopeDAQ has bult hard disk data logging capability.


The LogicDAQ system communicates with PC via USB 2.0 interface in High Speed mode, thereby achieving the maximum data transfer of 480mb/s. The device is powered directly from the USB port. With regard to notebooks with a smaller output current, the set can be optionally equipped with an external power supply. LogicDAQ is a device capable of recording and generating digital signals using 32 channels. The maximum sampling frequency is 400MHz device with the analog inp...

Our certificates
Certyfikat ISO 9001:2008 Certyfikat AQAP 2110:2009


Targi AMB Stuttgart 2018


Informujemy, że firma RK-SYSTEM prezentuje swoje przyrządy do wyważania dynamicznego na międzynarodowych targach AMB Stuttgart 2018. Zapraszmy Państwa do odwiedzenia nasze...

Aktualizacja oprogramowania Uprog


Poprawiono algorytm programowania układu ST7FLIT19BF1...

Aktualizacja oprogramowania Uprog


Poprawiono algorytm programowania układu 29F1G08ABADA oraz dodano układy 29F2G08ABAEA i 29F8G08ABABA...

Aktualizacja oprogramowania Uprog


Poprawiono algorytm programowania EEPROM w układzie ATmega32L (SPI)...

Aktualizacja oprogramowania Uprog


Poprawiono algorytm programowania układu STK15C88...

ul. Chelmonskiego 30
05-825 Grodzisk Mazowiecki, Poland

tel. +48 22 724 30 39, +48 22 755 69 83
fax +48 22 724 30 37
E-mail: rk-system@rk-system.com.pl
Support: support@rk-system.com.pl

Privacy policy